Massive Audio - Model D4000.2
Massive Audio D 4000.2 2-Channel
D Block Series Car AmplifierThe D4000.2 by Massive Audio, 4 Kilowatts,
2 channels, ONE GOAL… At the Massive Audio control center we always hear, “We Need More Power Captain!”
Massive Audio has responded by designing the “Largest Powered Two Channel It Has Ever Designed.” The Massive Audio
“D-BiT” D4000.2 stands in at only 2.1” x 6.5” x 16.1” and pounds put over 4 Kilowatts Max. (500RMS
x 2 @ 4Ohm) This CEA 2006 Certified amplifier is a “Full Range
High Speed Digital.” With its low current draw, low operating temperature, LP/HP/Band pass crossover controls and X1/X10
switching you can set the outputs from 10Hz~200K or 100Hz~2KHz for a precise setting. Supplied RCA “bullet” adaptors
allow the installer to go directly into the RCA inputs which will activates the Auto Turn On/Off feature. Still need more power? Bridge this amp and it kicks out over Two Thousand Watts @ 4 Ohm Mono. So if you need more
power just go “Massive” on the universe with the D4000.2. FEATURES: - Extreme
Power in a Small Footprint
- Mil Spec Double Sided PCB with SMD Parts
- X10 Switch for HPF/LPF for Bandpass Crossovers
for All Channels
- Bullet RCA Adaptors that Activate Auto Turn On/Off
- Low Distortion Full Band Width for Sound Quality
Tuning
- Advanced Full Range Digital Design
- Built-in Noise Reduction Circuitry
- Full Mosfet with High
Grade Switching Devices
- World Wide Standard Complaint (RoSH, E-mark, CEA-2006, CE
- Advanced 5 Way Protection
- Illuminated
Logo on Heavy Duty Aluminum Heat-Sink
- Designed and Engineered in the U.S.A.
|
SPECIFICATIONS: 2 Ohm RMS | 1000W x 2 | 4 Ohm RMS | 500W x 2 | 4 Ohm RMS Bridged | 2000W x 1 | Input Level | 0.2~5v | Frequency Response | 15~55KHz | THD at 4Ohm Load 30% Rated Power | <0.15% | S/N Ratio | >70dB | BassBoost | 0~12dB | Efficiency | >80% | Minimum Load | 2 Ohm | Dimensions | 2.1"H x 6.5"W x 16.1"L |
|
|