70-9003 UPC #: 12300254755, 12537032003, 086429012015, 086429084746 Vehicle
Compatibility: , for BMW; 325Ci, 325i, 325xi, 328i, 330Ci, 330i, 330xi, 335i, 525i, 530i, 540i,
CC, Cooper, G8, R32, Touareg, X3, X5, Z4
|
|
Metra 70-9003 Receiver Wiring Harness
This vehicle-specific
wiring harness makes connections between your new car stereo and your car's electrical system. It includes a wire
bundle with a connector and a separate red wire for the accessory (12-volt switched) connection. This individual 42"
red wire must be run from the receiver to the vehicle's fuse panel to provide 12-volt switched power.
First,
attach the color-coded wires on your harness to the wires from your new stereo. If you're not using a soldering iron,
we recommend that you purchase some wire connectors to secure the connections. Check out our handy article on
three ways to connect the wiring harness here.
Now, once this harness is connected to your new stereo, you'll
be able to plug right into your car's factory radio connector. This harness makes installing your new stereo easier,
and allows you to put the factory radio back when you sell your vehicle or return it at the end of the lease. A
detailed instruction sheet comes with the harness.
Please read this important note: This harness may not contain
provisions for every wire needed to complete your installation, and it will not accommodate special navigation, video,
or factory steering wheel control connections. You will need a special adapter if you want your factory steering wheel
audio controls to work with your new stereo.
Connections:
12V constant power
12V switched power chassis ground power antenna turn-on
left front speaker +/- right front speaker +/- left rear speaker +/-
right rear speaker +/-
|