Metra 70-1785UPC
#: 086429105526 Vehicle
Compatibility: Connect a new car stereo in select 1988-95 Volkswagen and
Audi models.
|
Click Here to Return To Audi Menu
|
The Metra 70-1785 wiring harness makes connections between your new car stereo and your car's
electrical system. First, attach the color-coded wires on your Crutchfield-supplied harness to the wires from your new stereo.
If you're not using a soldering iron, we recommend that you purchase some wire connectors to secure the connections. Check
out our handy article on three ways to connect the wiring harness here.
Once this harness is connected to your
new stereo, you'll be able to plug right into your car's factory radio connector. In order to use your factory amplifier,
you'll have to connect the RCA connectors on this harness to the preamp outputs on your new receiver – you'll
want to pick a car stereo with at least two sets of preamp outputs (front and rear).
First, attach the color-coded
wires on your harness to the wires from your new stereo. If you're not using a soldering iron, we recommend that you purchase
some wire connectors to secure the connections.
Now, once this harness is connected to your new stereo, you'll
be able to plug right into your car's factory radio connector. This harness saves installation time since you won't
have to cut factory wires individually, and this also enables you to re-install the factory radio if needed. A detailed
instruction sheet comes with the harness. Please read this important note: This harness may not contain provisions for
every wire needed to complete your installation, and it will not accommodate special navigation, video, or factory steering
wheel control connections. You will need a special adapter if you want your factory steering wheel audio controls to
work with your new stereo.
This Harness's Connections:
Wire Code Chart:
Vehicle/Radio
Harness
Wire Color Function Red +12 Volt Accessory Yellow
+12 Volt Constant Black Chassis Ground Blue Power Antenna Blue/white
Amp Turn-On Orange/white Illumination White Left Front Speaker + White/Black
Left Front Speaker - Gray Right Front Speaker + Gray/Black Right Front
Speaker - Green Left Rear Speaker + Green/Black Left Rear Speaker - Violet
Right Rear Speaker + Violet/Black Right Rear Speaker - Preamp/RCA Harness
RCA
Color Function White Left Front Speaker Channel Gray Right
Front Speaker Channel Green Left Rear Speaker Channel Violet Right Rear Speaker
Channel Note:Your aftermarket head unit will need to features four preamp/RCA outputs.
|